Robotics
Robotic arm components
Machined aluminum components for a robotics platform, first article to production.

Robotics
18,000 units
6082-T6 aluminum
First article + CMM
Q2 2025
Five-axis machining
Thread machining
Anodizing
CMM inspection
Components holding tolerance, prototype through production.
An industrial robotics platform needed high-strength machined aluminum components carried from first article through recurring production without re-qualifying tooling or fixtures at each stage. Treating prototype and production as separate processes risked introducing dimensional differences right as the platform moved toward volume.
MachiniX qualified the fixturing and program on the same tooling used for first article, so the transition from prototype to recurring production didn't require a second qualification cycle. Critical dimensions tied to joint and mounting interfaces were locked early and held constant as volume increased, rather than being revisited each time a new batch was released.
The process was also structured so incremental production releases could run without a full re-setup, keeping cycle time and part consistency stable whether the platform ordered ten units or a hundred.
01) Single qualification path
First article and recurring production run on the same tooling and program, removing the need to re-qualify as volume increases.
02) Interface consistency
Joint and mounting interface dimensions are locked early and held constant across every production release, not re-evaluated batch to batch.
03) Scalable batch sizes
The process runs without a full re-setup regardless of order size, keeping cycle time and part consistency stable from small releases to larger ones.
04) Platform-ready components
Components arrive ready to integrate with the robotics platform at any production stage, from initial prototype through sustained recurring orders.
Weight reduction
Annual production volume
First-pass acceptance

